Product Classification

Your current position:HOME>>Filter Media>>Activated Carbon Filter

Product Application

Activated Carbon Filter

     Activated carbon filter is a steel cylinder container. Within the container, water supply and drainage devices are installed, while corresponding pipelines, valves and instruments are set outside the container. Place activated carbon into the container to make an activated carbon filter. For operation, water to be processed enters from the upper filter and passes through the activated carbon filtering layer from upside down. The absorbing activated carbon absorbs and removes the hazardous substances in the water.
    Activated carbon has higher absorption capacity at its early period and the capacity decreases along with its service time. If the water in the water tank becomes muddy and has higher organics content, the activated carbon will soon lose its filtering function. Therefore, activated carbon should be periodically cleaned or replaced. 
    Size of the activated carbon particles also has an impact on its absorption capacity. Usually, the smaller the activated carbon particle, the larger filtering surface is. Therefore, powder activated carbon has the largest filtering surface and best absorption effect. However, powder activated carbon can easily flow out along with the water, and can hardly be changed. Thus, it is seldom adopted. Granular activated carbon is formed and relative stable. Impurities like organics in water will not easily block the activated carbon. Also it is of high absorption capacity and easy transportation and replacement.
    In water treatment, activated carbon filter is mainly used to remove micropollutants in water, with scope of application covering decoloration, odor and various dissolvable organic removal; in pure water techniques, it may used for pretreatment for ion exchange, electrodialysis and reverse osmosis to remove organics, colloids and residual chlorine; it may also used for deep treatment after secondary treatment to ensure the quality of reclaimed water.
    Specifically, it can absorb organics, colloidal particles and microorganisms in water, can absorb chlorine, ammonia, bromine iodine and other nonmetallic substances, can absorb metal ions including silver, arsenic, Cr VI, Hg, Sb and Sn ions, and can effectively remove chroma, smell and heat in water and extend service life of exchange resin.
 
Character：
Temperature：５℃～40℃
Model：ф173-ф3600
Speed： 5 m³/h -12.0 m³/h
Flow rate：0.5 m³/h -125.0 m³/h
Operation：hand or auto
Material：304、316L、Q235、FRP
Pressure：0.05MPa-0.6MPa
Specification：
Name
Model
Flow rate （m3/h）
In/Out let
FW03-003
ф173×1500
0.3
DN15
FW03-006
ф223×1600
0.6
DN20
FW03-008
ф300×1650
0.8
DN20
FW03-010
ф350×1700
1.0
DN20
FW03-012
ф400×1900
1.2-1.6
DN25
FW03-015
ф500×2000
1.5-2.5
DN25
FW03-020
ф600×2050
2.0-3.6
DN32
FW03-030
ф800×2600
3.0-6.5
DN40
FW03-060
ф1000×2700
6.0-8.5
DN50
FW03-090
ф1200×2800
9.0-10.5
DN50
FW03-110
ф1400×2850
11.0-15.0
DN50
FW03-160
ф1500×2900
16.0-17.0
DN65
FW03-180
ф1600×2950
18.0-20.0
DN65
FW03-210
ф1800×3050
21.0-25.0
DN80
FW03-260
ф2000×3150
26.0-30.0
DN80
FW03-310
ф2200×3200
31.0-40.0
DN80
FW03-400
ф2400×3250
40.0-50.0
DN100
FW03-500
ф2500×3300
50.0-58.5
DN100
FW03-530
ф2600×3450
53.0-63.5
DN125
FW03-600
ф2800×3550
60.0-73.5
DN125
FW03-700
ф3000×3650
70.0-84.5
DN150
FW03-800
ф3200×3750
80.0-100.0
DN150
FW03-100
ф3500×4000
100.0-125.0
DN200
 
 

MORE>>