Pure Water

Product Classification

您当前所在的位置:首页>>Pure Water

Product Application

Process water used by pharmaceutical manufacturers mainly refers to the water used in the processes including bottle washing and preparation for production. Avoid relating name of water with the manufacturing process, for example, deionized water, demineralized water and distailled water. Disconnect the manufacturing process of water from its name, but classify water based on the quality indicators from the chemical and micro-organic perspectives (e.g. Chinese Pharmacopeia stipulates that purified water can be prepared through three methods. Better method may be studied in the future).

Pharmaceutical preparation, LVP, TCM drinks, health care products and bio-genetic engineering require purified water equipment meeting GMP certification.

Water quality meets the regulations of 2000 Pharmacopoeia Standards and GMP.

Full automatic operation and conditional full automatic processing procedure of equipment (like backwash, regeneration, acid pickling and disinfection processes).

All equipment and pipelines meet GMP requirements (back end processing equipment such as sterilizer, filter, end water tank and pipelines adopt 316L materials, and pipelines for pretreatment equipment adopt 304 pipes).

Pharmaceutical pure water preparation technology

Raw water → booster pump → metering pump → multi-medium filter → activated carbon filter → water softener → precise filter → primary RO → middle water tank → middle water pump → ion exchanger → purified water tank → delivery pump → UV sterilizer → microporous filter → user

Raw water → booster pump → metering pump → multi-medium filter → activated carbon filter → water softener → precise filter → primary RO → middle water tank → middle water pump → EDI equipment → purified water tank → delivery pump → UV sterilizer → microporous filter → user

Raw water → booster pump → metering pump → multi-medium filter → activated carbon filter → water softener → precise filter → primary RO → middle water tank → secondary RO → purified water tank → delivery pump → UV sterilizer → microporous filter → user

Secondary RO adopts the yields of primary RO as raw water for secondary reverse osmosis to get water with conductivity ≤3μs/cm. It has been widely applied in drinking pure water. RO technology usually is applied to pre-desalination, reducing the load of ion exchange resin by over 90% and resin regenerant amount by 90%. Thus, it not only saves operation expenses, but also is conducive to environment protection. The achievements of RO excel that of distillation, electrodialysis and ion exchange.

Specification：

Name Model Flow rate (m3/h) In/outlet

FW68-001 Ф300×1600 0.25 DN20

FW68-002 Ф400×1800 0.5 DN20

FW68-003 Ф500×2100 1.0 DN25

FW68-003 Ф600×2200 2.0 DN32

FW68-004 ф1000×2800 3.0 DN40

FW68-005 ф1300×3000 5.0 DN50

FW68-006 ф1400×3100 8.0 DN65

FW68-007 ф1800×3200 10.0 DN65

FW68-008 Ф2000×3400 15.0 DN80

FW68-009 ф2200×3500 20.0 DN80